E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-3517002.png)
6
Detach seal (3)
NOTE: Installation: replace seal (3).
7
Detach bracket (5, 6) at evaporator housing
8
Unscrew bolt (10)
9
Open clamp (9) of clamping bracket (11) in direction of arrow (arrow A), then slide out the clamping bracket (11) in direction of arrow (arrow B)
10
Unclip clamps (4)
11
Detach evaporator housing (8)
12
Remove heat exchanger (7)
NOTE: Do not damage sealing tape on the heat exchanger (7).
13
Install in the reverse order.
