E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
Engine Oil: Procedures
Engine Oil Level Indicator
Engine oil level indicator
Note: The vehicle must be horizontal for at least 5 minutes with the engine switched off at operating temperature. Otherwise measurement accuracy can
be compromised.
1. Switch on ignition
2. Press the system selection button (S110s3) repeatedly until (A1p13) the basic display (kilometer reading or temperature display) or speed display
is shown.
3. Press the scroll back and forward button (S110s1) repeatedly until message "engine oil level measurement in progress" appears in the multifuntion
display (A1p13).
5. The measurement result is shown in the multifuntion display (A1p13).
6. Correct the engine oil level if necessary and check engine oil level again.
7. Switch off ignition.
AP18.00-P-0101-02PI Suction Off Engine Oil
AP18.00-P-0101-02PI Suction off engine oil