E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-490001.png)
Outside Temperature Display Sensor: Service and Repair
AR54.30-P-6341T Remove/Install Outside Temperature Indicator Sensor
1
Disconnect ground cable of battery
2.1 Detach lower front engine compartment paneling
2.2 Remove front bottom part of noise encapsulation
3
Unclip outside temperature indicator temperature sensor (B14) from front bumper
4
Unplug electrical connector (1) and remove outside temperature indicator temperature sensor (B14).
5
Install in the reverse order
