E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
Inspect
6
Inspect rubber mounts (4a, 4b) of tie rod (4).
NOTE: If rubber mounts are damaged, install a new tie rod.
7
Install in the reverse order
8
Perform chassis alignment check.
AR46.40-P-0200T Remove/Install Outer Tie Rod
Remove/Install Tie Rod
1
Press tie rod joint (10a) out of steering knuckle assembly.
CAUTION: Installation: Replace self-locking nut.
2
Loosen lock nut (10f) and unscrew tie rod (10)
NOTE: Counterhold the tie rod (10) to slacken the lock nut (10f) (arrows).
3
Install in the reverse order
4
Check front wheel toe and adjust if necessary.
AR46.40-P-0201T Remove/Install Inner Tie Rod With Axial Joint
Remove/Install Inner Tie Rod With Axial Joint
1
Remove track rod
2
Remove bellows