E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
Shifter A/T: Removal and Replacement
AR27.60-P-0901T Remove/Install Electronic Selector Lever Module (ESM)
AR27.60-P-0901T Remove/Install Electronic Selector Lever Module (ESM)
Remove, Install
Danger:
-
Risk of fatal accident from vehicle slipping or toppling off the lift platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer
NOTE:
-
The vehicle must be horizontal
-
Park vehicle on two or four-column lift platform or over inspection pit
CAUTION: Notes on self-locking nuts and bolts
1
Raise vehicle
2
Detach shift rod (1) from intermediate lever (2) of electronic selector lever module control module (N15/5)
NOTE: Pull locking plate (1b) off shift rod (1) using needle nose pliers
3
Remove selector lever handle (3) with cover
4
Remove cover (4) at selector lever
5
Cover selector lever gate of electronic selector lever module control module (N15/5) with a cloth
CAUTION: Objects that fall into the electronic selector lever module control module can cause damage
6
Remove ashtray housing (5) from center console
7
Unscrew bolts (6a).
8
Open center armrest (7).
9
Remove cable retainer (8).
-
With telephone in center armrest.