E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-2329002.png)
Test Values For Torque Converter
Special Tools
Repair Materials
Remove torque converter
Component Identification
1
Position transmission vertically.
2
Mount grab handles (065) on torque converter.
3
Remove torque converter from transmission housing.
4
If there are metal shavings in the transmission oil pan:
Drain transmission oil from torque converter through a clean cloth.
If there are metal chips in the cloth, replace torque converter.
In case of doubt flush out the torque converter with transmission oil.
Remaining metal chips can cause transmission damage!
5
If transmission oil is burnt or interspersed with abrasive particles:
Flush oil cooler lines and oil cooler.
Install torque converter
