E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
/v6-3.0l_dsl_turbo_(642.920)/Page-2426002.png)
Component Identification
1
Position puller with pulling arms (see magnified section).
2
Pull rubber mount (7b) together with grooved ball bearing off the joint fork.
Shown on linkage arm in model 220
AR41.10-P-0100T Remove/Install Propeller Shaft Intermediate Bearing and Replace Grooved Ball
Bearing
AR41.10-P-0100T Remove/install propeller shaft intermediate bearing and replace grooved ball bearing
Component Identification
