E 320 BLUETEC (211.022) V6-3.0L DSL Turbo (642.920) (2007)
Start screen
Electronic drive line inclinometer
Selection Menu Screen
2
Press the STEP button.
"Articulation angle" "Measurement" is selected.
Selection menu screen
Erasing memory
Main Menu Screen
The "Erase memory" function allows you to erase the memory before measuring an angle for the second time. But this is not absolutely essential, as
after the first angle is stored the angles from the previous measurement are erased from the memory. The memory is likewise erased if the measuring
instrument is switched off in the meantime.
3
Press the MEMORY button.
The values saved in the memory are displayed.
Main menu screen