E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-3821002.png)
5
Continue routing GPS antenna line (11) of GPS antenna (25) along on-board wiring harnesses into driver footwell and fix in place ensuring it does
not chafe or make any noise.
Component Identification
6
Insert GPS antenna connector extension line (14) in driver footwell and connect GPS antenna plug (13) to GPS antenna connector (12) of GPS
antenna line (11).
7
Route GPS antenna extension line (14) in the left cable duct up to the area of the left rear seat and fasten in place such that it does not chafe or
make any noise.
8
Route GPS antenna extension line (14) as shown in the picture along on-board wiring harnesses into luggage compartment (see arrow) and fasten
in place such that it does not chafe or make any noise.
Shown on model 211.0
9
Route GPS antenna extension line (14) as shown in the picture in the luggage compartment and strap down excess length of GPS antenna
extension line (14) to on-board wiring harnesses (see arrows).
The GPS navigation processor coupling (9) of the GPS antenna extension line (14) is connected to the navigation processor later.
Shown on model 211.0
