mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Keyless Entry Module > < AR82.62-P-8000T Remove/Install Keyless GO Antenna In Rear Bumper
Page 1
background image

Antenna - Keyless Entry: Service and Repair
AR82.62-P-8000TA Remove/Install Keyless GO Antenna In Trunk

AR82.62-P-8000TA Remove/Install Keyless GO Antenna In Trunk

- with CODE (889) Keyless go

1

Disconnect ground cable of battery 

2

Unscrew nuts (1) and remove damping material (2) from trunk 

3

Separate electrical plug connection (3) 

4

Unclip trunk Keyless Go antenna (A2/35) from luggage compartment floor using mounting wedge

See "Special Tools" given below.

5

Install in the reverse order

Special Tools

Mounting Wedge, P/N # 110 589 03 59 00

Keyless Entry Module > < AR82.62-P-8000T Remove/Install Keyless GO Antenna In Rear Bumper