E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
Sunroof / Moonroof Frame: Service and Repair
AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame
AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame
- with CODE (414) Power glass tilting/sliding roof
Shown On Model 211.0
Shown On Model 211.0
1
Remove paneling from sliding/pop-up roof
2
Remove sliding/pop-up roof panel
3
Remove headliner
4
Remove front roof paneling
5
Remove rear roof trim
6
Disconnect all electrical connectors from roof crossbeam,expose wiring harnesses, separate tie straps and remove roof crossbeam
7
Remove water drain hoses (1)
CAUTION: Do not damage water drain hoses (1), otherwise penetrating water may cause damage.
8
Insert assembly pliers (5) on both sides
NOTE: The assembly pliers (5) secure the sliding/pop-up roof frame (6).
See "Special Tools" given below.
9
Unscrew screws (2, 3)
-
Screw on sliding/pop-up roof frame: 8 N.m