E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
Parking Brake Cable: Service and Repair
AR42.20-P-0525T Remove/Install Rear Brake Control Cable
Remove/Install Rear Brake Control Cable
Shown On Model 211.0
Shown On Model 211.0
Remove/Install
DANGER:
-
Risk of death. Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
-
Risk of injury, body parts may become jammed or crushed. Risk of injury, skin and eyes may be injured due to brake fluid spraying out
at high pressure when working on the SBC brake system
-
Deactivate SBC brake system using STAR DIAGNOSIS.
1
Raise vehicle.
2
Deactivate SBC brake system using STAR DIAGNOSIS.
CAUTION: See notes on repairs to brake system
3
Remove crossmember (35)
4.1 Detach heat shields (105d, 105e) from body and push backwards