E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-2691001.png)
Yaw Rate Sensor: Procedures
Remove, Install Yaw Rate And Lateral Acceleration Sensor
1
Remove front seat
NOTE: Right front seat.
2
Remove front edge guard (2) in area of front scuff plate (1)
3
Remove front scuff plate (1)
4
Remove rear edge guard (4) in area of rear scuff plate (3)
5
Remove rear scuff plate (3)
6
Unclip rear footwell ventilation grill (6) (arrow) and remove
7
Remove rear passenger compartment floor covering (7) below B-pillar paneling (8).
8
Lift up rear passenger compartment floor covering (7).
