E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-3468003.png)
1
Remove evaporator housing
2
Unscrew screws (2)
3
Detach right blending air flap actuator motor (M2/7)
NOTE: Installation: Check condition of adjusting mechanism. If damaged, remove the corresponding part from the kinematics parts kit.
4
Disconnect electrical connector (1).
5
Install in the reverse order
6
Synchronize the stepper motors.
AR83.10-P-2003TA Remove/Install Actuator For Right Blending Air Flap
AR83.10-P-2003TA Remove/Install Actuator For Right Blending Air Flap
- For right rear
- with CODE (581b) Convenience automatic air conditioning
1
Remove evaporator housing
