E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
2
Unscrew screws (2)
3
Detach rear right blending air flap actuator motor (M 16/31)
NOTE: Installation: Check condition of adjusting mechanism. If damaged, remove the corresponding part from the kinematics parts kit.
4
Disconnect electrical connector (1).
5
Install in the reverse order.
6
Synchronize the stepper motors.
AR83.10-P-2004T Remove/Install Actuator For Left Defroster Vent Flap
AR83.10-P-2004T Remove/Install Actuator For Left Defroster Vent Flap
- with CODE (581) Comfort automatic air conditioning
1
Remove cross member below instrument panel
2
Remove bolts (1)
3
Detach left defroster vent flap actuator motor (M2/8)
4
Disconnect electric connector (2)
5
Install in the reverse order
6
Synchronize the stepper motors.
AR83.10-P-2005TA Remove/Install Actuator Motor For Right Defroster Vent Flap
AR83.10-P-2005TA Remove/Install Actuator Motor For Right Defroster Vent Flap
- with CODE (581) Convenience automatic air conditioning
Component Identification