E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
Auxiliary Cabin Heater Control Valve: Service and Repair
AR83.70-P-6000T Remove/Install Coolant Circuit Solenoid Valve
- with CODE (228) Stationary heater or retrofitted staionary heater
1
Disconnect ground cable of battery
2
Remove front section of fender liner in front fender
NOTE: Front piece on right.
3
Disconnect plug and socket connection (5)
4
Disconnect coolant hoses (1) with clamps (3)
NOTE: Collect escaping coolant in a clean vessel and return to the coolant expansion tank following installation of the solenoid valve (2).
-
See "Special Tools" given below.
5
Disconnect coolant hoses (1) from solenoid valve (2)
6
Undo nuts (4) and remove clamp on solenoid valve (2)
-
Nut, solenoid valve to bracket: 4 N.m
7
Remove solenoid valve (2) from bracket
8
Installation is carried out in the reverse sequence
Testing
9
Inspect cooling system for leaks.
Special Tools
Clamp, P/N# 000 589 40 37 00