E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-3494001.png)
Blower Motor: Service and Repair
AR83.25-P-1200T Remove/Install Blower Motor
1
Disconnect ground cable of battery
2
Remove cover below instrument panel (right)
3
Disconnect electrical connector (1)
4
Unscrew screws from blower base (2)
5
Remove blower base (2)
6
Unscrew screws (3) and remove blower motor (A32m1) with blower regulator (A32n1)
NOTE: Do not place blower motor (A32m1) on fan wheel since the blower motor (A32m1) will otherwise be unbalanced.
7
Remove electronic blower regulator (A32n1) from blower motor (A32m1)
8
Install in the reverse order
9
Perform function check.
