mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.20-P-1003T Switching Switch and Controls Illumination On/Off, Function|Page 22525 > < GF82.20-P-1003T Switching Switch and Controls Illumination On/Off, Function|Page 22523
Page 3
background image

If the corresponding vehicle door is closed. If the vehicle door remains open for more than 5 minutes, the entrance/exit lamps are automatically switched
off via the overhead control panel control unit (N70).

Switching on again after automatic switch-off

The duty cycle extends or renews itself, if a status change occurs at the door contact switches, "circuit 15 ON" is switched on via the electronic ignition
switch control unit (N73), or the vehicle is locked or unlocked and as a result of the interior CAN being deactivated or activated.

The CAN message "night" is set in the event of a defect in the rain/light sensor (B38/2).

The entrance/exit lamps are independent of the adjustment of the automatic driving light actuation in the instrument cluster (A1).

In Model 211.6, depending on equipment and special body, the number and position of the interior lamps may vary.

GF82.20-P-1003T Switching Switch and Controls Illumination On/Off, Function|Page 22525 > < GF82.20-P-1003T Switching Switch and Controls Illumination On/Off, Function|Page 22523