E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
NOTE: Counterhold valve body (3) using installation tool for tire pressure monitor or pin diameter 2 mm (4).
8
Tighten union nut (1).
NOTE: Secure valve body (2) against turning using installation tool for tire pressure monitor or pin diameter 2 mm (4).
CAUTION: After tightening, remove installation tool for tire pressure monitor or pin diameter 2 mm (4) from valve body (3). Danger of
damage to tire.
9
Press RPM wheel sensor gently into drop center of rim and tighten bolt (5).
10
Note ID code (b) of new TPM wheel sensor.
NOTE: It is advisable to record the code in the owner's manual or maintenance booklet.
11
Teach in new TPM wheel sensor in TPM control module using STAR DIAGNOSIS.
12
Activate the tire pressure monitoring system.
AR40.15-P-0080AS Remove/Install Wheel Sensor
AR40.15-P-0080AS Remove/install wheel sensor
- with CODE (475) Tire pressure monitor (Siemens)
Component Identification