E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-1538003.png)
4
Transfer alignment mark to new rubber bushing (17d).
5
Position chamfer of rubber mount (17d) on chamfer (arrow) of spring control arm (17).
The rubber bushing slot (17d) must align with the linear axis of the track control arm (17).
6
Use press out/in tool (011, 012) to press in the rubber mount (17d) until the collar of the press out/press in tool (011) abuts the spring control arm
(17).
When pressing in make sure that the rubber mount (17d) does not twist or turn.
