E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-1693002.png)
Upon replacing the high-pressure pump, the leak should be marked on the pump and on the associated drawing and evaluated. The drawing with
the identification of the leak and the evaluation of the leak should be sent back with the old part.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
September 4, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
