mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.95-P-0001-01T TELE AID, Location Of Components|Page 170 > < GF82.95-P-0001-01T TELE AID, Location Of Components|Page 168
Page 14
background image

GF82.95-P-2003T Emergency Call Actuation, Function

GF82.95-P-2003T Emergency Call Actuation, Function

- with CODE (383) With telephone "Standard" in console on right side of dome with integrated TELEAID emergency call system, hands-free system
and antenna
- with CODE (930) Taxi emergency call
- with CODE (934) Taxi emergency alarm unit

TELE AID can be triggered manually or automatically:

Manual

^

With the aid of the SOS switch (S93/3s1), if the vehicle is not involved itself in an accident or the driver requires help.

^

With the aid of the emergency alarm system activate button (S62/6) with code (450) taxi version

^

For diagnostic purposes with STAR DIAGNOSIS

Automatic

^

Via the restraint systems control unit (N2/7) when an airbag/ sidebag is deployed or in the event of a severe rear end collision

A TELE AID emergency call is completed when the service center terminates the voice connection.

Emergency call priority

The information, regarding the type of emergency call that was triggered, is entered into the emergency call telegram generated by the
telecommunications control unit (N112). The types of actuation have various priorities:

1. Automatic emergency call/highest priority
2. Manual taxi emergency call
3. Manual emergency call (TELE AID)
4. Telediagnosis call via telediagnosis button (S93/6s2)
5. MB-Info via MB-Info button (S93/6s1)

If an emergency call with a higher priority is already active when an emergency call is triggered, this call with the higher priority is completed.
If an emergency call with lower priority is already active when triggering, this call is interrupted and the emergency call with the higher priority is
started.

Peculiarities with code (930) taxi emergency call

A taxi emergency call should not be noticed by the person(s) posing the threat. For this purpose the emergency alarm system activate button (S62/6) is
concealed in the driver's footwell. An indicator lamp, which confirms that the emergency alarm system activate button (S62/6) has been pressed, may be
installed as an option. It comes on for 2 minutes after a taxi emergency call is triggered. The indicator lamp is installed so that only the driver can see
when it flashes. Moreover, it is ensured that in the event of a taxi emergency call:

^

No dial or ring tone can be heard

^

The dialing proceeds without sound

^

The state display in the SOS switch (S93/3s1) is not activated

^

The radio volume is not reduced or muted

^

No confirmation messages from the service provider or the police can be discerned

The police monitors the passenger compartment via the hands-free system on a taxi emergency call and decides if a voice connection should be
completed.
The taxi emergency call is terminated:

^

By the police

^

Automatically (after 90 min) by the telecommunications control unit (N112)

^

When an automatic TELE AID emergency call is triggered.

It is only permissible to trigger a TELE AID emergency call or a taxi emergency call in emergency cases. During an emergency call is it not possible to
operate the telephone system.

GF82.95-P-0001-01T TELE AID, Location Of Components|Page 170 > < GF82.95-P-0001-01T TELE AID, Location Of Components|Page 168