E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-141013.png)
18.
Install clamp-on mounting bracket (B, Figure 19):
^
Position mounting bracket (B) onto SBC hydraulic unit (A) as shown in Figure 19.
Note:
^
Ensure mounting bracket (B) is flush with SBC hydraulic unit (A).
^
Torque mounting clamp screw to 5 Nm while pressing bracket (B) onto SBC unit (A).
19.
Insert a cable tie through slots (arrows, Figure 17) in bracket, do not close cable tie.
Note:
Cable tie installation shown on "bolt-on" type mounting bracket, cable tie installation for clamp-on type bracket is similar.
