E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-138008.png)
11.
Close the (gray) secondary lock of the SBC connector housing (A, Figure 10) by sliding the lock in the direction indicated by the arrows (Figure
10) using a small screwdriver until it locks into place.
12.
Loosely wrap the exposed SBC wire harness using fabric tape (arrows). Do not wrap the ground wiring harness (A, Figure 11) into the SBC wire
harness.
13.
Reinstall the SBC wire harness connector cover in reverse order.
Note:
Ensure the locking lugs (arrows, Figure 6) on the harness connector are properly engaged into the harness connector cover.
