E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-226003.png)
^
Perform control module reset:
Navigate through the following screen menus: Control units/Information and Communication/ASSYST PLUS control unit adaptations/Control
module reset.
^
Verify that there are no stored Fault codes in CGW, ASSYST, or ASSYST+, if none are stored proceed to next step. If fault code 910A is now
current, proceed to step 2, Subject B.
