mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1789 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1787

E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)

Page 4
background image

4. Connect warning element wiring harness (22) and attach to headliner with adhesive felt tape as shown in the diagram.

5. Route warning element wiring harness (22) along existing cable on left side of headliner and fasten.

After installing the headliner, the cables should be routed on the C-pillar behind the antenna amplifier.

Component Identification

25 Parking assist wiring harness

6. Route warning element wiring harness (22) with overhead control panel/frame floor system connector (X25/8) to the rear wall beside the left rear

door.

AZ54.65-P-0001-06T Routeing and Connecting Wiring Harness

AZ54.65-P-0001-06T Routeing And Connecting Wiring Harness

AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1789 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1787