mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1792 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1790

E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)

Page 7
background image

Component Identification

1. Connect connector of supply wiring harness (1) with Quickpark control unit (10).
2. Fasten Quickpark control unit (10) to right-hand side piece using double-sided adhesive tape.

Bonding surfaces must be pre-treated in accordance with adhesive tape manufacturer's instructions.

3. Lever off cover of rear shelf and use a suitable tool to shorten the retaining lug so as to preclude the risk of damage to the warning tone speaker in

the installed state (see arrow in picture).

Do not scratch the top surface of the cover.

AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1792 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 1790