E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-3243002.png)
Component Identification
Install
4
Rub circumference of rubber mount (1b) with liquid lubricant.
5
Fit bracket (01k) on rear axle carrier.
6
Insert rubber mount (1b) into thrust piece (01l).
The bumps of the rubber mount (1b) must be seated in the recesses of the thrust piece (01l). Pay attention to installation position. The notch
(arrow) of the rubber bushing (1b) must point towards the vehicle rear.
7
Pull rubber mount (1b) flush into rear axle carrier by screwing in the spindle (01m).
