E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-2066003.png)
Component Identification
6
Grease the crankshaft journals with multipurpose paste and insert torque converter into transmission housing.
Do not use force, otherwise the axial stop of the torque converter will be destroyed.
Move torque converter back and forth so that the teeth on the torque converter and the transmission primary pump engage in one another.
Measure installed height of torque converter in transmission housing
Component Identification
7
Measure dimension "A" between transmission housing and torque converter mounting using a depth gauge.
Torque converter and primary pump will be damaged if torque converter is seated incorrectly in transmission housing.
