E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
Component Identification
6
Position sensor bracket (020c) with sensor (020a) on rear axle center assembly adapter (020h) by turning slightly to left/right (magnetic). The
spiral cable (020b) of the sensor (020a) must point in the direction of travel for each measurement. Otherwise the measurement will be inaccurate.
Shown: model 211 with 187 mm dia. rear axle center assembly
Shown: model 211 with 210 mm dia. rear axle center assembly (210E)
Component Identification
The meter is ready to take a measurement. The value measured is shown on the display.
7
Press SAVE button.
The values are saved.
Measured values screen for angle 4, display e.g. 2.68 degrees