E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
/l6-3.2l_dsl_turbo_(648.961)/Page-2269006.png)
Component Identification
Task
The electronic selector lever module control unit (N15/5) receives digital and analog input signals, converts these and actuates various components or
transmits information to various control units via the Controller Area Network bus class C (engine compartment) (CAN-C).
The selector lever positions and touch shifts performed are recognized without contact using the opto-electronic switches. A photoelectric barrier is
closed or interrupted each time the position of the selector lever is changed.
Internal input signals:
^
Selector lever position
^
Transmission mode switch (S16/5)
^
Touch button ±
^
Voltage supply
Internal output signals:
^
R/P locking solenoid
^
Shift gate illumination (circuit 58d)
The following information is received via CAN-C:
Instrument cluster (A1)
^
Circuit 58 dimmed
ESP, SPS [PML] and BAS control unit (N47-5) (model 211), ESP control unit (N47-5) (model 219)
^
Wheel speed and direction, right rear
^
Wheel speed and direction, left rear
^
Set braking torque
for EIS control unit (N73)
^
Circuit 50
^
Tml.15
^
Stop light switch (S9/1)
^
Stop lamp feedback
^
Initialization, personalization, authenticity for stage 3 drive authorization system (DAS 3)
