E 320 CDI (211.026) L6-3.2L DSL Turbo (648.961) (2005)
Headlamp Washer Spray Nozzle: Service and Repair
AR82.15-P-6100TA Remove/Install Telescoping Nozzle For Headlamp Cleaning System
AR82.15-P-6100TA Remove/Install Telescoping Nozzle For Headlamp Cleaning System
- with CODE (600) Headlamp cleaning system
- with CODE (489) AIRmatic (semi-active air suspension)
Illustrated On Left Telescopic Nozzle
1
Remove left headlamp unit
-
When removing left telescopic nozzle
2
Fold open telescopic nozzle flap (2)
-
When removing right telescopic nozzle
3
Unscrew screw (3).
-
When removing right telescopic nozzle
4.1 Remove bottom engine compartment paneling at the front
4.2 Remove bottom part of noise encapsulation at the front
5
Place telescopic nozzle (1) to the rear in the engine compartment
-
When removing right telescopic nozzle
NOTE: Until the retaining clip (4) is accessible.
6
Press retaining clip (4) and detach hose (5) from the telescopic nozzle (1)
7
Take out telescopic nozzle (1)
8
Install in the reverse order
9
Check headlamp cleaning system for proper function