mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Remove and Install Adjusting Rail For Head Restraint|Page 8079 > < Remove and Install Adjusting Rail For Head Restraint|Page 8077
Page 1
background image

Head Rest: Service and Repair
Installation Procedure For Rear Seats Headrest

 Installation For Rear Seats Headrests 

Scope of work

1. Connect ground line to battery.
2. Remove front lefthand floor mat and insulation underneath.
3. Remove cover on front and rear lefthand door entrance.
4. Remove cover of lefthand front wall pillar.

5. Remove cover (a) under instrument panel,left.
6. Remove cover on radio cutout or radio.
7. Remove cover on shift lever, on ashtray and on heater actuation.
8. Remove front seat and rear seat bench with backrest.
9. Remove lining on rear pillar left and right, first aid material tray and hatrack with reinforcements.

10. Remove lower lining on center pillar left, as well as loosen belt strap end on lefthand side member.
11. Loosen carpeting in rear at door entrances and fold sideways.
12. Open covers for electric lines in legroom left front and rear.
13. Remove lining between fuel tank and trunk.

Remove and Install Adjusting Rail For Head Restraint|Page 8079 > < Remove and Install Adjusting Rail For Head Restraint|Page 8077