E 320 Sedan (210.065) V6-3.2L (112.941) (1999)
Rear Door Panel: Service and Repair
AR72.12-P-1010FB Remove/Install Door Liner on Rear Door
AR72.12-P-1010FB Remove/Install Door Liner on Rear Door
- with CODE (979) Special protection version
- with CODE (Z04) Light armoring
- with CODE (Z06) B6 armoring
1. Stop
2. Clamp
3. Screw
4. Round cover plate
5. Handle
6. Screw
7. Cover
9. Clips
10. Door liner
Removal, installation
1. Remove stop (1) and clip (2) and unhook curtain from rail on door liner
2. Unscrew screw (3) on lock cover (4) and remove lock cover downward
3. Press off handle recess (5) with installation wedge
4. Unscrew screw (6) in area of door interior actuating mechanism
5. Press off cover (7) below armrest and unscrew screw
6. Unclip entry lamp, disconnect electric lead
7. Press door liner (10) off of inner door panel at bottom, front and rear with installation wedge
Note:
Insert installation wedge directly next to each clip
8. Unhook control cable on door interior actuating mechanism
9. Put down door liner
10. Check foil and clips on inner door panel
Note:
Replace damaged foil and clips
11. Check clips (9) on door liner
Note:
Replace damaged clips
12. Reinstall in opposite order