E 320 Sedan (211.065) V6-3.2L (112.949) (2004)
6.
Coat the underside/base (Figure 6).
7.
Screw the trunk lid stops in loosely.
8.
Pull buffer outwards in direction of arrow (Figure 7).
9.
Close and reopen the trunk lid.
10.
Push buffer two notches inward and then tighten to 4 Nm.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
February 14, 2008. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.