E 320 Sedan (211.065) V6-3.2L (112.949) (2004)
/v6-3.2l_(112.949)/Page-2911011.png)
21.
Secure ground wiring harness (arrow, Figure 15) to SBC wire harness (A) using two layers of fabric tape (B) in the circled area. Start taping
approximately 35 mm (X = 35 mm, Figure 15) from end of connector cover receptacle (C).
Note:
See last bullet of step 33 note concerning fabric tape placement.
^
Reposition SBC wiring harness with grommet (A, Figure 17) into the forward wall opening (B) in the wire harness guide (C).
