E 320 Sedan (211.065) V6-3.2L (112.949) (2004)
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the
vehicle manufacturer.
1
Remove engine mounts
2
Remove poly V-belt (1)
3
Dismount refrigerant compressor (A9)
NOTE: Attach refrigerant compressor (A9) with connected lines in the engine compartment.
4
Dismount left engine support (4) from crankcase
NOTE: To do this, unscrew screws (3).
CAUTION: Installation: Bolts (3) must be replaced, because the connection can loosen or the screws can tear off if reused.
5
Remove left engine support (4)
6
Install in the reverse order.