E 320 Sedan (211.065) V6-3.2L (112.949) (2004)
/v6-3.2l_(112.949)/Page-1723001.png)
Compression Check: Testing and Inspection
AR01.10-P-0010-01T Connect Compression Tester
Connect compression tester
1. Remove cover of left fuse and relay box in the engine compartment.
Installation: Check rubber seal in cover, replace if required.
Cover must be located in the groove at the rear.
2. Disconnect plug (1) at driver-side control unit with fuse and relay module (N10/1).
Shown on model 211.006
3. Plug adapter line (2) into plug position 5 of plug (1).
Shown on model 211.006
