mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

All Other Service Bulletins for Sunroof / Moonroof Module: > < Body - Panoramic/Sliding Roof Synchronization Loss
Page 1
background image

Sunroof / Moonroof Module: All Technical Service Bulletins
Body - Sliding/Panoramic Roof Synchronization Loss

Date: September 17, 2004

Order No.: P-B-77.20/19a

Supersedes: P-B-77.20/19 dated February 12, 2003

Group: 77

Revision: Applicable VIN Cut-Off and Part Number Change

SUBJECT:
Model 211.026/065/070/076/082/083, Up to VIN A609690 and X165949

Intermittent Synchronization Loss from Sliding Roof/Panorama Roof

If you receive customer reports in the above model vehicles of intermittent synchronization loss on sliding roof or panorama the condition may be the
result of the voltage at the overhead control panel (OCP) dropping briefly below 5 volts. It will set DTC code 9032 (supply voltage of control unit
N7211, upper control panel UCP [OBF] is to low [under voltage]) and it is not the part number listed below. To resolve, please replace the OCP with the
part numbers indicated below.

Parts Information

Note

The following allowable labor operations should be used when submitting a warranty claim for this repair.

In Case of Warranty

All Other Service Bulletins for Sunroof / Moonroof Module: > < Body - Panoramic/Sliding Roof Synchronization Loss