E 320 Sedan (211.065) V6-3.2L (112.949) (2004)
Tire Pressure Module: Service and Repair
AR40.15-P-0100T Remove/Install Tire Pressure Monitoring System Control unit
- with CODE (475) Tire pressure monitor (Beru)
- with CODE (475) Tire pressure monitor (Siemens)
1
Read out variant coding of TPM [RDK] control module (N88)
NOTE:
-
To do this connect STAR DIAGNOSIS and transfer data of TPM [RDK] control module (N88) to STAR DIAGNOSIS.
-
Installation: Transfer stored data to new TPM [RDK] control module (N88).
2
Remove left side paneling in trunk
3
Unscrew bolt (1), lift mounting bracket (2) slightly and swivel to the side
4
Unscrew screws (3) and remove TPM [RDK] control module (N88) from mounting bracket (2)
5
Unlock electrical connector (4) and detach from TPM [RDK] control module (N88)
6
Install in the reverse order
7
Read out fault memory and erase if necessary.
8
Activate the tire pressure monitoring system.