E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
Console: Service and Repair
Remove/Install Center Console
Removal and Installation of center Console
REMOVAL:
1. Disconnect the negative battery terminal.
2. Remove both floor mats and foam parts.
3. Remove the shift lever cover:
a. Remove the carpeted cover (1)
b. Pull off the shift lever sleeve (4)
c. Remove the retaining screw (2); holding the cover at the cutout of the shift lever and at the rear, lift the cover up and back.
4. Remove the ACC push-button control unit.
5. Remove the mounting screws, disconnect the electrical connections and remove the mounting plate.