E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
Power Door Lock Actuator: Service and Repair
Front Door Actuator
Removing and installing actuator (S47, S48, S49)
A. Front doors
a) Sedan and Station Wagon up to Vehicle Ident End No. A 391255/F 025885
-
Remove door liner.
-
Push back sliding sleeve (1).
-
Press out shift rod (2).
-
Slacken bolts (3).
-
Detach actuator (S47 or S48).
-
Press away strain relief (5).
-
Disconnect electric lead and pneumatic line.
-
Move actuator (S47, S48) into installation position by pushing sliding sleeve (1) back fully and withdrawing shift rod mounting (4) as far as
detent.
-
Install actuator in the reverse order.
b) Sedan and Station Wagon from Vehicle Ident End No. A 391256/F 025886
-
Remove door lining.
-
Slacken crank window and move into door shaft.
-
Withdraw sealing rail on window guide slightly down the way.