E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
Figure 15
Figure 16
3.
180° axial positioning, center, at bearing points 4 and 11 with two 180° thrust washers at the bottom (2c, Figure 15), (also Figure 16, item B).
Note:
Only camshafts with identification numbers 33 and 35 will be supplied by the parts department. If new engine timing parts are required for a
repair then they must be specified to the individual camshaft part number and, if necessary, the parts must be ordered.
CAUTION:
Camshafts with the identification numbers 19 21, 23 and 24 must only be combined with carbide wear surface valve tappets.