E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
-
Install the ignition/starter switch (S2/1) or glow/starter switch (S2/2) with the fixing lug in the recess of the steering lock (37) (arrow).
-
Observe PIN assignment for the ignition/starter switch (S2/1) or glow/starter switch (S2/2) when assembling new parts.
-
The ignition/starter switch (S2/1) or glow/starter switch (S2/2) can also be removed/installed when the steering lock is installed using a short
screwdriver.
-
The mounting bores (37k) for the ignition/starter switch (S2/1) or glow/starter switch (S2/2) and for the vacuum valve (37j) on diesel vehicles do
not have a thread on the ET steering lock made by "Huf". During assembly, the threads must be cut in the steering lock by the self-tapping screws.
8. Remove warning buzzer contact, exterior lamps (S8/1) in key position "1".
9. Remove glow/starter switch valve (37b).