E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
1
Disconnect pressure lines (P1, S1) and return line (T1) using open box wrench.
Installation Note
Check vehicle level and adjust if necessary.
S1 and S2 = 14 Nm.
P1 and T1 = 20 Nm.
2
Unscrew self-locking hex. nut (7a) and detach connecting rod (7).
Note: It must not be possible to pull ball pin out of ball socket.
Installation Note
Replace self-locking hex. nut, 10 Nm.
Model 124 in bore "b".
3
Unbolt both hexagon bolts (arrows) and remove level control unit (3) from bracket.