E 320 Wagon (124.092) L6-3.2L (104.992) (1994)
/l6-3.2l_(104.992)/Page-1703003.png)
Version on model 201 as of 01/84 and model 124
4. On vehicles with ASR
Unclip electrical cable (6w) of brake lining wear indicator (arrows)
5. Remove plastic guide rail (61) from spring link To do this, press through the plastic pin, pull guide rail (61) rearwards and remove upwards.
Installation note
Check for correct cable routing (arrows).
6. Remove, install rear spring (6p)
7. Remove self-locking hexagon nut (6m) of shock absorbers at spring link. Remove hexagon bolt (6p) and washers.
Installation note
Replace self-locking hexagon nut. Tightening torque 60 Nm. Torque wrench 001 589 66 21 00.
