E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
Cellular Phone Microphone: Service and Repair
AZ82.70-P-0005-08TA Retrofit Microphone For Hands-Free System
AZ82.70-P-0005-08TA Retrofit Microphone For Hands-Free System
- except CODE (273) Portable CTEL preinstallation (non-networked), VDA wiring
1
Route the microphone connector (4) of the microphone branch-off line (12) of the right A-pillar at the bottom along the vehicle's wiring harnesses
to the right A-pillar and fasten in place to prevent chaffing and noise.
2
Route microphone connector (4) of microphone branch-off line (12) from right A-pillar under the headliner and fasten in place using self-adhesive
felt to prevent chaffing and noise.
When routing to the right A-pillar make sure that the routing is placed before the front check strap of the windowbag to the windshield, so that the
windowbag function is not impaired.
3
Route microphone connector (4) of microphone branch-off line (12) under the headliner to the overhead control panel control unit (N70).
4
Connect the microphone plug (30) of the hands-free system microphone (15) with the microphone connector of the microphone branch-off line.
5
Glue hands-free system microphone (15) as shown to the mirror base cover (31) and align towards driver.