mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 19621 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 19619
Page 5
background image

A44/3 PTS warning display, rear

4. Connect warning element wiring harness (22) and attach to headliner with adhesive felt tape as shown in the diagram.

5. Route warning element wiring harness (22) along existing cables on left side of headliner and fasten.

After installing the headliner, the cables should be routed to the left C-pillar along existing cables.

Component Identification

25 Parking assist wiring harness

6. Route warning element wiring harness (22) with overhead control panel and frame floor system connector (X25/8) to the side wall beside the left

rear door.

AZ54.65-P-0001-06TT Routing and Connecting Wiring Harness

AZ54.65-P-0001-06TT Routing And Connecting Wiring Harness

AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 19621 > < AR54.65-P-0001T Remove/Install Parktronic System (PTS) Sensors In Front Bumper|Page 19619