E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
10
Remove footrest (8) and put down in front passenger footwell
11
Remove support (14)
12
Mark installation position of individual supply lines (red) (9)
13
Detach supply lines (red) (9) at the front prefuse box (F32) and put the supply lines (red) (9) to one side
NOTE:
-
Nuts remain attached to supply lines (red) (9).
-
Installation: Observe installation markings.
-
Nut, cable connection to front prefuse box: 7 N.m
14
Detach positive lead (black) (10) and put to one side
-
Nut, cable connection to front prefuse box: 14 N.m
15
Unclip fuse holder (11) at the front prefuse box (F32)
NOTE:
-
Number of fuse holders (11) varies depending on equipment configuration.
-
Installation: Pay attention to color coding of fuse holder (11).
16
Unscrew nuts (12)
17
Unscrew nut (13) and remove front prefuse box (F32)
-
Nut, terminal 30 in prefuse box: 7 N.m
18
Install in the reverse order.