E 320 Wagon (211.265) V6-3.2L (112.949) (2003)
^
If value (arrows, Figures 2, 3) odometer in "Internal ASSYST PLUS data" deviates from the total distance in "CAN reception data" by more
than 1,000 km/621 mi. or service has been neglected for thousands of days (arrow, Figure 4), then perform step 2, Subject B (Adaptation of
ASSYST/ASSYST PLUS values) otherwise, proceed directly to step 3 (Software update CGW).
2.
Adaptation of ASSYST/ASSYST PLUS values
^
ASSYST PLUS values:
Navigate through the following screen menus in DAS Control unit/Information and communication/ASSYST PLUS - Plus Active Service
System/Control unit adaptations/Version coding/Internal ASSYST PLUS data:
a) Apply reading of main odometer from "CAN reception data" (see printout). Enter miles if parameter "Reading of odometer"(top arrow,
Figures 5) shows miles, otherwise enter km. (conversion into km.: 1 mi. = 1.609 km).
b) Enter the operating time (in days) (bottom arrow) since initial registration, if greater than the current entry.
Rule: Number of months since initial registration x 30
^
ASSYST values:
Navigate through the following screen menus in DAS: Control unit/Information and communication/ASSYST active service system/Control
unit adaptations - ASSYST settings